T H E I N S T A L L A T I O N

INSTALLATION VIDEO

Learn how easy it is to install a Paneello soundproof fence! In our informative installation video, we guide you through every step of the process, from preparing the posts to attaching the panels. We show you how to align the posts perfectly, insert the panels effortlessly, and secure everything in place.

In addition to the video, we also offer a clear written guide that explains every step in detail. From selecting the right tools to making the final adjustments, we help you professionally install your Paneello soundproof fence.

I N S T R U C T I O N S

In three simple steps to the perfect soundproof fence: Our guide shows you how to quickly and efficiently install your new Paneello soundproof fence – from inserting the posts to attaching the cover plates.

Installing a fence can be so easy!

STEP 1

CONCRETING THE POSTS

RECOMMENDED!

1. Dig a hole (40 x 40 x 80 cm).

2. Insert the post and align it with a spirit level.

3. Fill the hole with concrete and let it harden. Done!

💡 Tip: Use quick-setting concrete with a curing time of about 15 minutes to save time during installation.

STEP 2

INSTALLING THE PANELS

1. First, slide the profile piece for the sight gap into the post. You can fix the profile piece with a screw or optionally concrete it in.

2. Carefully remove the protective film from the panels.

3. Insert the first panel into the guide rail of the two posts and slide it up to the sight gap. Ensure that the bottom panels maintain a 5 cm ground clearance to prevent dirt buildup.

4. Install the remaining panels in the same way.

💡Tip: To maintain an even height level, you can adjust the profile piece within the post to compensate for any uneven ground.

STEP 3

FINAL TOUCHES

1. Place the end profile on top of the last panel and, if needed, secure it with silicone or adhesive.

2. To close off the sides of the posts, insert an end profile into the open side of the first and last post.

3. Attach the cover plate to the post with screws.

4. Enjoy the peace and quiet!

💡 Note: Use the end profile only in visible areas!

ALTERNATIVE

ANCHORING THE POSTS

Optional!

Preparation

Mark the hole positions for the anchor bolts on the foundatio.
Drill the holes and clean them of dust and debris.

Post installation

Insert the anchor bolts into the holes of the foundation.
Screw the base plate onto the anchor bolts.
Insert the post into the base plate and secure it with two screws.

💡 Important: Due to wind load, a fence height of 120 cm should not be exceeded when using the anchoring method.

For the remaining steps, follow Step 2 and 3!